Home/Services
What We Fix
Residential, commercial and fire door services for homes and businesses, covering hardware, glass, screens, framing, sealing and full replacement. We diagnose the actual failure first, then repair or replace based on what it needs.
Service Lines
If it slides, swings, latches or seals, it is in scope.
The most common call we get. A sticking slider is nearly always hardware, not glass.
Swing doors that drag, rub the frame or will not latch cleanly.
Your front door is a security component. It needs to close square and lock without force.
The main hub for all door repair: sliding, entry, patio, impact, commercial, and shower doors.
When repair isn’t enough: full door and frame replacement, including hurricane-rated upgrades.
Full sliding door system replacement — when repair isn’t enough or you’re upgrading to impact-rated.
Worn, flat-spotted or seized rollers swapped so the panel rolls instead of dragging.
Damaged tracks repaired and straightened, capped with stainless steel, or replaced when a section is too far gone.
Locks, latches, keepers and pull handles repaired or replaced when a slider will not secure.
Rotted, split or out-of-square door frames and jambs repaired so the door closes and seals properly.
Service, repair and replacement for hurricane impact doors, including alignment, hardware and seals.
Windows that will not stay up, will not crank open, or will not lock.
New glass into the frame you already own, rather than a whole new window.
Torn, stretched or storm damaged screens on lanais, patios and porches.
Hurricane rated units are heavy and precisely fitted, which is exactly why they need service.
When a unit is genuinely past saving, replacement done properly and squarely.
Repair, exchange or replace shower door hardware, glass panels, seals and rollers when the enclosure no longer works cleanly.
Balances, springs, cranks and operators — the mechanisms that hold the sash up and move the window — repaired and replaced.
Sliding screen doors re-meshed, re-aligned and fitted with new rollers so they glide and close properly.
New glass shower doors and enclosures measured, supplied and installed.
Commercial doors take heavy daily traffic. We service and replace fire-rated door hardware, closers, hinges, latching and self-closing operation as needed.
When a storefront frame or unit is past repair, replacement fitted to the opening you already have.
Storefront entry doors repaired — pivots, closers, thresholds and glass in aluminum storefront systems.
Hollow metal and aluminum commercial doors repaired, re-hung and brought back into alignment.
Surface and concealed door closers adjusted, repaired and replaced so doors close and latch under control.
Panic bars and exit devices repaired, adjusted and replaced on commercial doors.
Hinges, pivots and commercial door hardware serviced and replaced on high-traffic doors.
Automatic door operator installation, repair and adjustment for commercial entrances.
Push-to-open button installation and repair for automatic door systems.
Glass and door service for storefront systems — panes, rails and complete storefront entries.
Door and window service for associations and property managers — common-area entrances and in-unit repairs, coordinated around your building’s access, approval and documentation requirements.
Fire door assemblies repaired so the door closes fully and latches on its own again.
Fire doors replaced and installed when the existing door or frame is damaged beyond repair.
Fire-rated latches, hinges and exit hardware supplied and fitted as part of fire door work.
Closers on fire doors adjusted and replaced so the door self-closes and latches every time.
Seals and weatherstripping on fire doors replaced when worn, damaged or missing.
Fire-rated caulking and firestop sealants applied at fire door frames as part of fire door work.
One family, one job: keeping air and water on the outside of your doors and windows. Drafts, rain entry, and water standing in the track are sealing failures — worn weatherstripping, split caulk joints, tired perimeter seals — and they are repaired at the actual entry point, not by replacing the door or window.
Weatherstripping on entry and exterior doors replaced to stop drafts and driven rain at the frame.
Window weatherstripping and sash seals replaced on windows that leak air or water.
Worn, compressed or missing weatherstripping across doors and windows repaired or replaced.
Failed caulk joints around door and window frames removed and re-sealed.
Silicone sealing at frames, thresholds and glass joints renewed where the old seal has split or pulled away.
Perimeter frame sealing that closes the gap between the frame and the wall against air and water.
Sealing and weatherstripping on commercial doors and storefront frames.
Leak and draft tracing at doors and windows, sealed at the actual entry point.
Stainless-steel and corrosion-resistant rollers, tracks and hardware used in our sliding door work, chosen for coastal conditions.
Where the work shows up: leaks and drafts at sliding doors are covered under sliding glass door repair, window sealing under window repair, and entry-door drafts under door repair.
Before
After
Repair Or Replace
Some failures are a worn part inside a frame that is still good: a roller, a seal, a pane of glass. Others are the frame or unit itself, damaged beyond what a part swap can fix.
When a repair solves it, that is what we do. When it will not, we install a proper replacement instead of patching around the real problem.
Get an honest assessmentOur Repair Standards
Whatever the service line, the method does not change.
Guides & Resources
Why sliding doors stick or stop locking, what salt air does to rollers and tracks, and what a repair actually involves — read the guides on the LM Doors and Windows Repair blog.
Get Started
Describe the symptom and we will work out the cause. That is the diagnosis, and it is where every job starts.
Phone: (305) 833-9474
Email: service@lmsolutionsfl.com
Or check whether we cover your ZIP code.
