Call Now(305) 833-9474

Home/Service Areas/Pembroke Park

Where We Work

Door and Window Repair in
Pembroke Park, FL

  • Licensed & Insured
  • Same-Day Service
  • Local South Florida Experts

Pembroke Park is two towns sharing one small map. On one side, mobile-home communities where the housing stock is manufactured and the doors are sized to match; on the other, the warehouse and commercial frontage along Hallandale Beach Boulevard, where the doors are steel, glass and aluminum and they open a few hundred times a day. It is a genuinely unusual mix for a town this size — and each side fails in its own way. LM Doors and Windows Repair handles door repair, window repair and door replacement on both sides of Pembroke Park. (We are the Park, not the Pines — a different town, and we keep the two straight.)

A home in Pembroke Park, South Florida

What We Do

Door and Window Services in Pembroke Park

Two stocks, one town — the repair menu for both, with Same-Day Appointments Available.

Sliding Glass Door Repair

Sliding panels in the park communities and the boulevard businesses, repaired at rollers, track, lock and handle.

Roller & Track Repair

Roller sets renewed and rails restored so heavy glass panels roll cleanly instead of grinding.

Entry Door Repair

Manufactured-home entry doors — the narrower, shorter sizes the parks run on — repaired and replaced true to size.

Commercial Door Repair

Warehouse, storefront and service-entry doors along Hallandale Beach Boulevard — closers, pivots, locks, glass.

Shower Door Repair

Shower doors re-hung and re-sealed in manufactured and conventional bathrooms alike.

Window Repair

Window mechanisms — balances, cranks, locks, latches — replaced at the part that failed.

Most Requested

Sliding Glass Door Repair in Pembroke Park

Sliding doors in Pembroke Park work in two different worlds. In the mobile-home communities, the sliders are lighter manufactured units, fitted to openings that do not follow conventional sizes, and their rollers and tracks are sized to match — when they wear, the replacement parts have to match too, or the panel never sits right again. Along the boulevard, the sliders and storefront panels are commercial glass, heavier and cycled far harder, and they fail at rollers and tracks under sheer repetition.

Our sliding glass door repair service starts by identifying which world the door lives in. Rollers are matched to the unit — stainless-steel, corrosion-resistant components where weather reaches them — tracks are straightened, capped or renewed, and lock and alignment work leaves the panel closing square. The hardware detail is on our sliding door roller & track repair page. Many roller and track repairs can be completed in a single visit, depending on the condition of the door and the parts required.

Manufactured-home sliders deserve one extra note: a mobile home shifts and settles a little over the years, and its doors tell the story first — a panel that used to glide starts binding at one corner. That is often an alignment answer, not a replacement answer, and it is exactly the kind of diagnosis we make on site before anyone orders a door.

Windows

Window Repair in Pembroke Park

Window work in the park communities runs on manufactured-home stock: single-hung and sliding windows in sizes the conventional catalog does not carry, plus awning windows on many of the older units. They fail the way all windows fail — balances tire and sashes drop, cranks strip, locks stop pulling the sash shut — but the repair has to be sourced to the unit’s actual dimensions. Our window repair service works at the part level and measures before it orders, so a small window never waits on a wrong-size part.

Glass and screening round out the residential picture. Cracked panes and fogged units are changed in the frame where the frame is sound, through window glass replacement; rated units follow the impact windows and doors path; and the screened porches and lanai enclosures that manufactured-home living leans on are re-meshed under screen repair when the fabric tears or slackens.

On the boulevard side, the windows are storefront glass and office units — a different scale of the same disciplines: seals, hardware, and panes replaced without taking a business dark. One town, two stocks, and a truck stocked for both is the whole secret.

Repair or Replace

Door Repair vs. Replacement

In Pembroke Park the repair-or-replace question has a local twist: the right answer depends on which side of town the door stands on.

Repair — Worn rollers, a latch out of line, a closer slamming, a lock that has stopped catching. Part-level failures, answered with a focused door repair while the frame and unit stay in place.

Replacement — A rotted or cracked frame, a manufactured-home door whose size-matched unit has failed through, or a storefront entry damaged past its hardware: a measured door replacement, sized to the actual opening — standard or not.

Sliding doors — Repairable almost by default. Between rollers, tracks, locks and re-alignment after settling, nearly every complaint a sliding glass door raises here has a mechanism-level answer.

Impact / hurricane doors hold their rating through fit and seals; both are checked at every service, and a unit that has stopped rating gets an honest replacement recommendation.

Measure first, verdict second — in a town of non-standard sizes, that order matters more than anywhere else we work.

For Businesses

Commercial Door Service in Pembroke Park

The boulevard frontage is Pembroke Park’s second town: warehouses, distributors and storefronts whose doors are equipment, not decoration. A dock-side personnel door that will not latch, a storefront closer that slams or leaks, a service entry with a tired pivot — each one is a security or trading problem the day it happens. Our commercial door repair covers closers, locks, hinges, pivots and storefront glass, and commercial door installation takes over when an entry is finished. Book around your operating hours and we will plan the visit to suit them.

Local Conditions

Why Pembroke Park
is hard on doors

A small town with an outsized split personality — and conditions that work differently on manufactured homes than on warehouse steel.

  • Settling and shiftManufactured homes move a little as the years pass, and doors and windows register the movement first: binding corners, latches out of line, seals opening at one side.
  • Heat and humidityThe same South Florida air as the coast, minus the breeze in the park interiors — moisture works on seals, thresholds and hardware all summer.
  • Commercial duty cyclesBoulevard doors open hundreds of times a day; closers, pivots and locks wear on a commercial clock, not a residential one.
  • Storm-season rainWind-driven rain tests every seal in town, and finds the gaps in manufactured-home door seals and storefront thresholds alike.
Where a sliding door wears out first Diagram of a sliding door in a Pembroke Park home, flagging the rollers riding the bottom track, the lock hardware, the weatherstripping, and the glass and glazing. Glass & glazing Lock & handle Weatherstripping Rollers & track

Communities & Commercial

Park Communities & Boulevard Businesses

The mobile-home communities run through their own managements, with their own rules for exterior work, access and paperwork — and the boulevard properties answer to landlords and facility managers. Either way, the coordination discipline is the one we work to everywhere. Building and association requirements vary. Tell us about any approval, access, documentation, or Certificate of Insurance requirements when you schedule, and we'll coordinate with you and your building management before the work begins.

Community and property managers can hold their Pembroke Park stock under the arrangement on our association and property-manager services page — unit doors, common entries and commercial frontages under one specification.

Neighborhoods

Neighborhoods We Serve

The mobile-home communities · The Hallandale Beach Boulevard commercial frontage · The residential streets between · ZIPs 33009 and 33023.

Pembroke Park asks a service company to be two companies: a residential crew that understands manufactured housing — its dimensions, its settling, its community rules — and a commercial crew that treats a warehouse entry as the working equipment it is. Our answer is one team stocked and scheduled for both, because in a town this size the two calls often come from the same street. What we will not do is bring conventional-size assumptions to non-standard doors; every unit here gets measured as it stands.

Addresses in town run on two ZIP codes, 33009 and 33023 — both inside the Broward ranges published on our Broward County page, where the checker confirms coverage street by street.

Common Questions

Pembroke Park
frequently asked questions

Yes — and the sizes are exactly why the parks call us. Manufactured-home entry and sliding doors run narrower and shorter than conventional stock, and their hardware is matched to the unit. We measure the actual opening and the actual door before ordering anything, and repair at the part level wherever the unit allows it.

Usually not. Manufactured homes settle slightly over the years, and a slider shows it first — the panel goes out of square and starts binding. Re-alignment, fresh rollers and a lock reset answer most of these calls; a replacement is only the answer when the frame itself has failed.

Same-Day Appointments Available — call (305) 833-9474 to schedule.

Yes — that is routine in the park communities. Building and association requirements vary. Tell us about any approval, access, documentation, or Certificate of Insurance requirements when you schedule, and we'll coordinate with you and your building management before the work begins.

Yes. Personnel doors, service entries and storefronts along Hallandale Beach Boulevard are core commercial work for us: locks, closers, hinges, pivots and glass. Tell us the operating hours and we will schedule so the building stays secure and trading.

Yes. Screened porches and lanai enclosures are part of manufactured-home life here, and we re-screen them — frames repaired where they are sound, mesh renewed where it has torn or slackened — along with window screens and screen doors.

Yes. The door is measured as it stands — height, width, swing and threshold — and the replacement is sourced to the manufactured-home dimensions, not forced from conventional stock. If the existing door can be honestly repaired instead, we will tell you that first.

No — and the distinction matters for scheduling. Pembroke Pines is the large city to the northwest; Pembroke Park is the small town here by Hallandale Beach Boulevard, and it has its own page because its housing stock is genuinely different. We serve both; this page is the Park’s.

Get Started

In Pembroke Park?
Manufactured or commercial, we cover it.

Same-Day Appointments Available across Pembroke Park — the park communities and the boulevard alike. The team is family-owned, with a decade of experience behind it, and free estimates are available for eligible residential services. Describe the door and its building when you call; we will arrive with the right parts in mind.

Phone: (305) 833-9474
Email: service@lmsolutionsfl.com

Request a Service

Compact form, no obligation. We reply with next steps.

Your information is sent directly to our team and never shared.

We also cover the rest of Broward County — Hallandale Beach — Hollywood — West Park — Dania Beach — Miramar, and beyond.